Finishing off the power room

Easter provided me with 3 days off instead of the usual Sunday each week and we were able to get a fair amount accomplished in that time. I had made all the wall frames and roof trusses at home from some extra cheap timber I picked up off ebay. We trailered them up and simply lifted them into place and squared and fixed them in place.

You may notice the frames are doubled up, this was so the weatherboards and the internal linings would overhang the earthen walls to keep water externally and dust internally from sitting on the lip that would have been created had I used a single frame.

No bracing was used as the Hardi Plank weatherboards are able to be used as a structural brace.

We used a breathable barrier as per Hardi Plank installation instructions. Roof has a 75mm breathable blanket under the tin.

Door and window have been fitted, all I have left to do is flash the corners and give it a couple of coats of paint. Internally the fitout can be done as rain and wind make working outdoors too difficult.

Comments are closed.